Disposable Environmentally Friendly Paper Spoon Knife Making Machine

• Customization: Available
• After-sales Service: Engineers Available to Service Machinery Overseas
• Warranty: 1 Year
• Model NO.: DCS520
• Model: Dcs520
• Product: Paper Knife, Paper Fork, Paper Spoon
• Material: Paper Roll
• Max Forming Speed: 150PCS/Min
• Paper Thickness: 600-1000GSM
• Max Paper Layers: 6-9layers
• Total Power: Total Power
• Voltage: 380V / 50Hz (220V 60Hz) 3p
• Air Consumption: 2.0cube/Min
• Install Area: 100m^2
• Weight: 6000kg
• Transport Package: Plastic Film and Wooden Case
• Specification: 100 m^2
• Trademark: Lisheng
• Origin: China
• Production Capacity: 15sets/Month

Product Description

Machine picture for refer 

Machine demision


Sample

 

  waterproof test

 

  A knife and fork applycation 

Characteristic:
The innovative research and development of this project is in line with national industrial policies and environmental protection policies, and represents the current structural transformation of the traditional industrial economy to a green and environmentally friendly economy. It has a distinctive emerging green that is recyclable, usable, pollution-free, noise-free, energy-saving and emission-reducing. Characteristics of the environmental protection industry. The product is made of pure natural plant renewable biological resources, and has undergone high temperature disinfection during the production process, and does not produce any waste liquid, harmful gas or waste residue. The products meet the international environmental protection and sanitation requirements, are heat-resistant, water-resistant, and oil-resistant, and are suitable for microwave oven baking and refrigerator freezing and preservation.

Parameter

Model	DCS-520
Product	Paper knife, paper fork, paper spoon
Material	Paper roll
Max forming speed	150pcs/min
Paper thickness	600-1000gsm
Max paper layers	6-9layers
Total power	80KW
Voltage	380V / 50HZ (220V 60HZ) 3P
Air consumption	>=2.0cube/min
Install area	100m^2
Weight	6000KG

The production cost of standard knife, fork and spoon (158mm) is calculated
1. Output: 150 pcs/min;
2. Total weight of knife, fork and spoon: 10g/set;
3. Material yield: 70-80%;
4. Complete set of equipment personnel: 3-4 persons;
5. Material: roll paper;
6. Equipment area: 100 square meters
Include 3 sets machine below :
1.Pre-coating & Lamination & die cutting part machine


I. Laminating &Die cutting Machine parameter:

Item name	Specification	Qt'y
Powder tension controller	5kg Made in China	9 set
Air cylinder	Airtac, Taiwan	14 set
Die cutting servo motor	4.4kw Inovance	1 set
Die cutting servo motor	3kw Inovance	1 set
Roller servo motor	3kw Inovance	1 set
Air shaft	Dia. 76mm Made in China	9 pcs
PLC control system	Inovance	1 set
Temperature module	Made in China	2pcs
Touch Screen	Inovance	1 set

2.Forming machine



II. Forming Machine parameter:

Item name	Specification	Qt'y
PLC	Delta Taiwan	1 set
Manipulator servo motor	0.75kw Inovance	4 set
Vacuum pump	25L Made in China	1 set
Pressure Cylinder	20T Made in China	2 set
Touch screen	Delta	1 set
Temperature module	Made in China	1 set

3.Sealing and drying machine



III. Sealing Machine parameter:

Item name	Specification	Qt'y
PLC	Delta Taiwan	1 set
Glue disk servo motor	0.4kw Inovance	1 set
Touch screen	Inovance	1 set
Temperature module	Made in China	1 set
Inverter	Inovance	1 set

Electric list

Name	Brand	Country of origin
PLC	Huichuang	China
Servo motor	Huichuang	China
thermometer mode	Huichuang	China
approach switch	Omron	Janpa
power switch	Omron	Janpa
pneumatic component	AirTAC	Taiwan
oil-water separator	AirTAC	Taiwan

All machine will be tested before shipment.
And send video, sample, and container load photo one by one.

1.Are you a factory or trading company?
A: We are a factory, the real manufacturer not trader.

2.Where is your factory and how can I visit it?
A: Our factory is located in Ruian City, Zhejiang Province, China about 40 minutes by plane from Shanghai ( 5 hours by train)

3.What is your after-sale service?
A: We have been in flexo printing machine business for many years, we will send our professional engineer to install and test machine. Beside, we can also provide online support, video technical support, matching parts delivery, etc. So our after-salesservices is always reliable.

4.How to get machines price?
A: Pls provide following information:
1)The color number of printing machine;
2)Material width and effective print width;
3)What material to print;
4)The photo of printing sample.

Our Services
1 Year Guarantee !
100% Good Quality !
24 Hours online Service!
The buyer paid tickets ( go and back to wenzhou), and pay 100usd/day during the install and testing period!