4 color 1500mm width stack type flexo printing machine
Characteristics:
1.Easy operation, flexible starting, accurate color register.
2.The meter counter can set printing quantity according to the requirements. Stop the machine automatically at the quantity or when the material is cut off.
3.Manual printing cylinder lift and lower, it will stir the printing ink automatically after lifting.
4.The printing ink is spread by the anilox cylinder with even ink color.
5.Reliable drying system coordinated with high-speed rotation, it will automatically break circuit when the machine stops.
6.360°continuous and adjustable longitudinal register device.
7.The frequency control of motor speed adapts to different printing speeds. There are Jogging/Stopping buttons on the plate roller base and material rolling rack so as to make it easy operate the machine when the plate is installed.
Main parameter:
Technical Specification |
| Model |
YTB-41500 |
| Material feeding width |
1500mm |
| Max Printing Width |
1460mm |
| Colors |
4 colors |
| Material |
Non-woven fabric. Paper. Film. Aluminum foil. PVC.OPP.PE.BOPP.PE.NY.PET.CPP. |
| Thickness of plate |
1.7mm 2.28mm 3.94mm
Customized is available |
| Printing length |
Standard is 400mm,
Customized is available from 280-1000mm
|
| Maximum Printing speed |
100m/min |
Feeding material part:
- Single unwinder system, hydraulic loader for unwind system
- Automatic stop machine when break the material; When machine stop, keep tension and avoid the material loose or line deflection.
- Air shaft
- EPC (edge position control): With manually/automatically/ central return function, can adjust the rewind move left and right .
- Automatic tension control system with magnetic brake(10KG).
- Roller core diameter: 76mm
- Discharge maximum diameter: 1000mm
Printing sections:
- plate roller circumference: 300-1000mm, standard less than 400mm
- print material: resin plate or rubber plate
- Transmission between printing roller and anilox roller: Helical gears
- printing chromatography: 360-degree rotation
- adjustment method: By Manual (Automatic printing after adjust by manual, when start machine, no need register color again, the printing pressure and register all keep the same.)
- Printing roller lifting system: Automatic Hydraulic cylinder control roll up and down.
Drying system:
- The machine is equipped with blower and heater; and the heater employed central temperature control system
- Dry apparatus between each color, and one more dry apparatus after printing finished
Rewinding Part:
1.Single rewinder system, hydraulic loader for rewind system
2.Air shaft
3.Automatic tension control system with magnetic brake(10KG).
4.Roller core diameter: 76mm
5.Discharge maximum diameter: 1000mm
Sample:
Machine details:
Feeding material part:
1.Single unwinder system, pneumatic/hydraulic loader or by manual for unwind system for you choose
2.Automatic stop machine when break the material; When machine stop, keep tension and avoid the material loose or line deflection.
3.Air shaft
4.EPC (edge position control): With manually/automatically/ central return function, can adjust the rewind move left and right .
5.Automatic tension control system with magnetic brake(5KG).
6.Roller core diameter: 76mm
7.Discharge maximum diameter: 1000mm
Printing sections:
1.Plate roller circumference: 300-1000mm, standard less than 400mm
2.Print material: resin plate or rubber plate
3.Transmission between printing roller and anilox roller: Helical gears
4.Printing chromatography: 360-degree rotation
5.Adjustment method: By Manual (Automatic printing after adjust by manual, when start machine, no need register color again, the printing pressure and register all keep the same.)
6.Printing roller lifting system: Automatic Hydraulic cylinder control roll up and down.
Drying system:
1.The machine is equipped with blower and heater; and the heater employed central temperature control system
2.Dry apparatus between each color, and one more dry apparatus after printing finished
Certification:
Exhibition:
FAQ:
1.Are You a Factory or Trading Company?
-We are a factory, with 20 years experience on machines, our products sell very well all over the world.
2.Where is your factory located? How can I visit there?
-Our factory is located in Ruian Zhejing China. The nearest airport is Wenzhou airport. It's about 40 minutes by plane from Shanghai (5 hours by train). All our cliens, from home or abroad, are warmly welcomed to visit us.
3.What can the machine print on?
-Our machine is multifunction, can do roll to roll printing, such as paper, plastic, woven,nonwoven and so on . Surely, you can send us your products, and we'll offer you the proper machine.
4.Can I get some samples? How can I get it ?
-Yes, we can send you some free sample, but you are reponsable for delivery charages of TNT or DHL.
5.How about the after service?
-We can arrange engineers to service overseas.
6.Why choose Lisheng Machinery?
-We are one of leaders in this field(in China). Our high-quality products and service enabled us to expand our market from china to more than 60 countries.
7.I need a quotation/how much is your price?
-Please tell us your material,the width of your material,and how many color do you need? Then we will know which machine is suitable for you and suggest the right machie for you.
8.Waht's your delivery time?
-Usually finish the production within 30 days after we confirm to receive the 30% advanced payment.Actually need to check according to our stock & production plan.
9.How long is your machine's warranty period?
-All our machine have one year guarantee, starting from finished installation.
10.How would we do if the parts broken within warranty?
-We would express the free replacement partswithin the warranty date.
){kind=link}