Paper Cup Tissue Paper Flexographic Printing Machine Printing

• Customization: Available
• Printing Page: Single Faced
• Printing Color: 4 Colors
• Model NO.: YTC-41200
• Anilox Roller: Ceramic Anilox Roller
• Dryer: Electric Heating
• Type: Ink Jet
• Embossing Structure: Platen Press
• Structure: Satellite
• Application: Flexible Packaging Printing
• Automatic Grade: Automatic
• Printing Speed: 120m/M
• Material Feeding Width: 600mm, 800mm to 3200mm
• Max Printing Speed: 120m/M
• Material: Paper, Film, Non Woven Fabric, Linen, etc
• Delivery Time: 45 Days After Receiveing 30% Deposit
• Guarantee: 1 Year
• Transport Package: Film Shrink
• Specification: CE, ISO9001
• Trademark: LISHENG
• Origin: Pingyang
• HS Code: 84431600
• Production Capacity: 20PCS/Month

Product Description

Flexo Printing Machine Printing Tissue Paper flexographic printing machine


Suitable material:
1.drum rolling type
2.Suitable water -base ink or oil-base ink .
3.Suitable: resin or rubber plate, thickness follow requested
 
Machine features: 
Method: Central impression for better color registration. With the central impression configuration, the printed material is supported by the cylinder, and greatly improving color registration, especially with extensible materials.
Structure: Wherever possible, parts are communism for availability and wear-resisting design.
Dryer: Hot wind dryer, automatic temperature controller, and separated heat source.
Doctor blade: open type assembly for high-speed printing.
Transmission: Hard gear surface, high precision Decelerate Motor, and encoder buttons are placed on both control chassis and body for operations convenience.
Rewind: Micro Decelerate Motor, drive Magnetic Powder and Clutch, with PLC control tension stability.
Gearing of Printing cylinder: repeat length is 5MM

Machine Production technology:
1 unwind unit→ Automatic tension control→ Automatic EPC 1pcs for unwind→6 Color Printing Unit→ Dry system → Automatic tension control → 1 rewind unit

 

Model	YTC4-600	YTC4-800	YTC4-1000	YTC4-1200	YTC4-1400
Printing color	4colors	4colors	4colors	4colors	4colors
Material feeding width	600mm	800mm	1000mm	1200mm	1400mm
Max Printing width	560mm	760mm	960mm	1160mm	1360mm
Max printing length	300-1000mm
Machine speed	150m/min
Printing speed	30-120m/min( depend on material, ink, plate design etc)
Register precision	Longitude:±0.15m m ; Transverse:±0.15mm
Master motor	3.7Kw, Taiwan Delta
The frequency converter	3.7KW , Taiwan delta
PLC	1set, Taiwan delta
Tension controller	2pcs
web guide (EPC)	1pcs
Machine total power	45KW	50KW	55KW	60KW	65KW
Machine weight7	6.0Ton	6.5Ton	7.0Ton	7.5Ton	8.0Ton
Machine size	6.0m× 2.4m ×3.2m	6.0m× 2.6m ×3.2m	6.0m× 2.8m ×3.4m	6.0m× 3.0m ×3.4m	6.0m× 3.2m ×3.5m

Feeding material part:
1.Single unwinder system, pneumatic loader for unwind system 
2.Automatic stop machine when break the material; When machine stop, keep tension and avoid the material loose or line deflection.
3.Air shaft 
4.EPC (edge position control): With manually/automatically/ central return function, can adjust the rewind move left and right .
5.Automatic tension control system with magnetic brake(10KG).
6.Roller core diameter: 76mm
7.Discharge maximum diameter: 1000mm
Printing sections: 1.printing consists of: central drum, plate roller, ceramic anilox roller, chamber doctor blade.2.plate roller circumference: 280-1000mm 3.print material: resin plate or rubber plate 4.Transmission: central drum with big gear drive the printing station. 5.adjustment method: Motorized longitudinal registration and Motorized Transversal Registration.(Automatic printing after adjust by motor, when start machine, no need register color again, the printing pressure and register all keep the same.) 6.Printing roller lifting system: Pneumatic cylinder control roll backward and forward , when the machine stop the printing cylinder will backward , when the machine running will forward by pneumatic cylinder automatic.


Electrical parts: 1.Main Motor: 7.5kw
2.heating and dry power 40kw .
3.Pull motor 1.5kw
4.Rewind motor :3.7KW
5.Ink motor and the color register motor 1.5 KW
6.The machine total consumption about 55 kw 7.Speed using frequency converter control
Rewinding Part:1.Single rewind system, pneumatic loader for unwind system
2.Automatic tension control system with magnetic brake(10KG).
3.Air shaft.
4.Roller core diameter: 76mm
5.Discharge maximum diameter: 1000mm
Drying system
1.Use hot air drying, intelligent constant temp control.
2.All the hot air between the printing units is supplied by one heating units.
3.Drying units are installed after the printing units, and air volume can be adjusted by independent damper/panel
4. The printing unit power it is about 10KW
5. The drying system after the printing it is about 30kw
6. Top dry system consistant 3 oven each oven 10kw ,adjust by independent  
Central drum
1.The central drum adopt hollow with two layers structure, made from superior alloy
2.steel and precise dynamic balance treatment and surface electroplated treatment to make the frame surface without etching.
3.The central impressing drum adopts high precise imported double row roller
4.bearing for supporting, imported together with the central drum.
5.The central impressing drum has constant temperature system of 32ºC. With water cooling system(optional)
6.The central drum is driven by a big gear
7.A high precision encoder is installed at the axial head of the central drum which speed of plate cylinder and anilox roller is synchronous with the central drum
Chamber doctor blade and ink pump
1.Equipped with doctor chamber for fast change.
2.It is made from Aluminum alloy and closed type to reduce solvent volatilization
3.and keep the ink in good viscosity and clean.
4.The blade and chamber sealing block are easy to change and clean.
5.There is forward and reverse directions doctor inside the chamber. The reverse
6.doctor is for sealing the chamber and the forward doctor is for scratching the ink.
7.The doctor blade is with even strength, easy to adjust.
8.ink supply adopt double diaphragm pump. Easy to suck the ink .
 Frame and web running
1.The frame is made of alloy cast iron with high strength and lower stress. It is
casted by resin sand process and treated by vibration aging.
2.Integral type guide roller structure.
3.Assembled modularization in design.
4.Frame thickness 100mm
5.Guide roller Φ100mm  (Surface anodic oxidation treatment)









FAQ

1.Are You a Factory or Trading Company?
We are a factory, with 20 years experience on machines, our products sell very well all over the world.

2.Where is your factory located?  How can I visit there?
    Our factory is located in Ruian Zhejing China. The nearest airport is Wenzhou airport. It's about 40 minutes by plane from Shanghai (5 hours by train). All our clients, from home or abroad, are warmly welcomed to visit us.

3.What can the machine print on?
   Our machine is multi-function, can do roll to roll printing, such as paper, plastic, woven,non-woven and so on .
Surely, you can send us your products, and we'll offer you the proper machine. 

4.Can I get some samples? How can I get it ?
   Yes, we can send you some free sample, but you are responsible for delivery charges of TNT or DHL.

5.How about the after service?
We can arrange engineers to service overseas.

6.Why choose Lisheng Machinery?
We are one of leaders in this field(in China). Our high-quality products and service enabled us to expand our market from china to more than 60 countries.

Contact me freely
Candy 

We have been working hard to become your Purchasing Guide and provide you one-stop Purchasing service. We are looking forward to hear from you soon.