Customization: | Available |
---|---|
Printing Page: | Double Faced |
Printing Color: | 8 Colors |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
8 Color Stack Type High Speed Flexo Printing Machine
Product
Printing Material: | PE, PAPER, NON-WOVEN... | |
Machine color: | 8 Color | |
Max. Material width: | 1000mm | |
Max. Printing width: | 960mm | |
Max. Printing length | 300mm~1000mm | |
Max. Machine speed: | 100m/min | |
Max. Printing speed: | 30-80m/min. | |
Plate thickness: | 1.14mm. 1.7mm 2.28mm. 2.84mm. 3.94mm Customized is available |
|
Double tap thickness: | 0.38mm(3M) | |
Printing cylinder on machine: | 40cm/ 1 set | |
Machine outside: | 6m(L)×2.4m(W)×3.8m(H) | |
Machine total power: | 35Kw | |
Voltage: | Voltage 380V, 3 pH, 50 Hz | |
Max. Single unwind diameter | Φ800mm | |
Unwind Way | Center unwind unit with 1set of automatic tension controller | |
Alarm device when off material | Automatic keep tension when machine stop; Avoid material loose | |
Tension control system | Auto tension 1 set | |
Unwind material holder | By air shaft 3'', 1 PCS | |
Unwind web cylinder | Φ76mm (inner diameter) | |
Traction Unit: | ||
Constitution of Traction | Aluminum roller | |
Traction Zones | 2 Zones, unwind and rewind | |
Bearing | NSK | |
One direction bearing | NSK | |
Printing Unit: : | ||
Machine Color | 8color | |
Principle of Work | Synchronous Belt Drive | |
Suitable Printing Ink | Water-based ink or Oil-based ink | |
Material of Plate | Resin | |
Anilox roller | Ceramic anilox roller, 8PCS | |
Inking supply way | Chamber doctor blade 8PCS | |
Ink motor | Independent ink motor, 50W / 8PCS | |
Printing Pressure | Mechanical adjust | |
Color register type | Manual | |
Printing plate lifting system: | Automatic Hydraulic cylinder control roll up and down | |
Heating and Drying Unit: : | ||
Blower | 24PCS | |
Double Blower way circle | Centralized heat, | |
Power of Heating | 35 kw | |
Single Rewind Unit: | ||
Max. Single rewind diameter | Φ1000mm | |
Rewind Way | Central rewind; With 5kg magnetic powder. | |
Tension control system | Automatic tension control 1PCS | |
Rewind material holder | By air shaft 3'', 1PCS | |
Rewind motor | 1.5Kw | |
Rewind web cylinder | Φ76mm (inner diameter) | |
Main Purchased part | ||
01 Main motor | Schneider brand from Germany | |
02 Bearing | NSK bearing | |
03 Ink operation motor | Wanshsin brand from Taiwan | |
04 Inverter | Delta brand from Taiwan | |
05 Ceramic anilox roller | Murata brand from Japan | |
06 Electrical parts | Schneider brand from France | |
08 Breaker | Schneider brand from France |
Configurations
Exhibitions
1. Are You a Factory or Trading Company?
We are a factory, with 20 years experience on machines, our products sell very well all over the world.
2. Where is your factory located? How can I visit there?
Our factory is located in Ruian Zhejing China. The nearest airport is Wenzhou airport. It's about 40 minutes by plane from Shanghai (5 hours by train). All our cliens, from home or abroad, are warmly welcomed to visit us.
3. What can the machine print on?
Our machine is multifunction, can do roll to roll printing, such as paper, plastic, woven, nonwoven and so on.
Surely, you can send us your products, and we'll offer you the proper machine.
4. Can I get some samples? How can I get it?
Yes, we can send you some free sample, but you are reponsable for delivery charages of TNT or DHL.
5. How about the after service?
We can arrange engineers to service overseas.
6. Why choose Lisheng Machinery?
We are one of leaders in this field(in China). Our high-quality products and service enabled us to expand our market from China to more than 60 countries.
If you are interested in, pls contact me freely!