Technical data
Number of print units: 8-colors
Printing width: max. 1200 mm
Material diameter: max. 600 mm
Print repeat: min.360 mm
max. 1000 mm
Print repeat infinitely variable from min. up to max. repeat range.
The press is equipped with a basic shaft
(pneumatic) with a diameter of 3inch.
The press enables a minimum mechanical print
repeat of 360 mm.
Anilox:Anilox sleeves - Ø 178 mm
Circumference 560 mm
Basic shaft diameter for Anilox Ø 156.088 mm,
With pressured air supply.Can be customized
Optional brand:ZECHER GERMANY,SONDON ENGLAND ,MURATA JAPAN
Printing cylinders sleeves: Basic shaft diameter for cylinder Ø 105.158 mm,
With pressured air supply.
Fiberglass printing cylinder
Repeat length: Min Ø360mm,Max Ø1000mm.
Winding System:
Unwinding: turret type non-stop unwind
Reel diameter: max. 600 mm
Core inside diameter: 3/4/6 inch
Rewinding: non-stop rewind
Reel diameter: max. 600 mm
Core inside diameter: 3/4/6 inch
Web tension range: min. 20 N
max. 300 N
Servo motor control-The use of floating roller device, low friction cylinder and encoder ensures constant tension
Web guide: Edge guide system before printing and rewind
with one ultrasonic scanning head
Continuously with great accuracy for the slightest alignment variations
Mechanical speed: max. 500 m/min
Printing speed: max. 400 m/min
Note:Depending on inks, plates, design and materials
Drying system: Electric heating heating
Central Drum
Temperature controlled, servo driven, anti-corrosion plated central impression cylinder with a diameter of Ø2000mm.
The impression cylinder design comprises a double-wall.construction to ensure consistent temperature of water flow over the whole CI surface.
The temperature control of the central impression cylinder guarantees a constant cylinder temperature and constant.cylinder dimensions. The temperature-controlled circuit is a closed-loop system and comprises a heating and cooling unit to maintain a constant liquid temperature of 30°C +/- 1°C.
TIR (Total Indicated Run out) of the impression cylinder +/- 0.005 mm (+/- 0.0002").
Drive device: The torque motor is used to directly drive the center drum omitting the traditional transmission components, achieving a color registration accuracy of ±0.1mm and reducing maintenance costs by 30%.
Audited Supplier 
){kind=link}